Office Shredder

428100 Conveyor Belt Shredder

INQUIRY

Convenient and practical with 428mm wide conveyor belt type paper inlet; up to 130 sheets can be shredded at a time for smoother daily work, shredding capacity 300-500 (kg/hour), shredding volume can reach 3-5 tons per day.

Equipped with optional discharge conveying device, convenient for discharging and packing of shredded materials for transportation.

Equipment with work lock, can effectively prevent non-specified personnel from using the machine: comprehensive safety devices, stop when the funnel or front door is open, the paper feed is too high automatic stop, overload automatic reversing, can ensure the safety of users, tool lubrication and oiling system is equipped to effectively extend the service life of the machine; with overheating protection, 5Kw motor to make the shredding a wider range, and a variety of shredding modes for users to choose. Specifically can be shredded.

Optical discs, floppy disks, paper clips, magnetic cards, paintings and calligraphy, confidential information, etc.: funnel feeding, more convenient for shredding hard and crumpled paper, cards, etc., and can effectively protect the safety of the operator; shredding pressure function to avoid frequent cleaning of waste and affect the progress of work, effectively improving the efficiency of work; the whole machine with pulleys and fixed feet, which facilitate the movement of the machine and ensure that the machine bucket stable; the machine is suitable for large The machine is suitable for large offices, printing plants, public security bureaus and other government agencies, printing rooms, archives, computer rooms and a variety of data centralized destruction sites.

Requirements for long-term large number of crushed cards and discs (more than 20 million cards or discs crushed per month applies):

Credit cards and cards for plastic materials, and some card types have a film on the surface, long-term continuous use, tool rotation for a long time will have melted sticky to the top of the tool to affect the service life of the equipment: for this situation, the equipment needs to pay attention to the following 2 operating specifications.

1. regularly let the oil pump to the tool part of the oil lubrication: equipment in the crushing card, lubrication frequency is set at every 2-5 minutes to the tool lubrication once (according to the use of the situation can be adjusted): oil pump content for 1L, about 1-2 hours need to refuel the oil pump once: if the crushing paper and a small amount of card, you can set 2 hours to refuel once, in this case, 1-2 weeks to refuel the oil pump once:.

2. Regularly put the card to the conveyor belt: the credit card will be laid flat on the conveyor belt, the overlap thickness of the flat card should be less than 3, each time into the card, need to be 10-20CM before and after the interval, to avoid too much into the card caused by blockage and reversal.